Aller au contenu
Bunder Mobility — veicoli elettrici professionali

Organiser les tournées et la recharge d'une flotte de tricycles électriques

FLOTTECo-fondateur et directeur général, Bunder Company8 min

Acheter des véhicules électriques pour une entreprise ne se limite pas au modèle et au point de recharge. Dès qu'il y a plusieurs engins, il faut coordonner horaires, trajets, retours au dépôt et le temps de recharge des batteries.

Tricycles eCargo au dépôt avant la tournée

La question n'est pas seulement combien d'heures dure une recharge. Il faut savoir quand chaque engin rentre, quand il repart et quelle énergie récupérer entre-temps. Disponibilité et régularité du service en dépendent.

Commencer par les tournées, pas par les prises

Reconstituez d'abord une journée type. Pour chaque tricycle, notez :

  • departure and return times;
  • kilometres and route type;
  • work activity and load carried;
  • charge level before departure and on return, if available;
  • deadline to be ready again;
  • pauses where the unit can stay parked.

This separates short shifts from long or demanding routes—not everyone needs the same charging plan.

Collect several representative days, including peak workload. A plan built only on an average day may fail when distances, loads, or simultaneous returns change.

Pour relier distance et énergie du tour, voir autonomie du tricycle électrique de travail.

Répartir les véhicules en groupes opérationnels

Une flotte se gère mieux par groupes d'usage : heure de départ, durée de tournée, distance et créneau de retour.

Six tricycles might split into three on early services returning mid-afternoon and three on longer shifts—different charging windows and priorities.

Groups need not be rigid: plan charging for tomorrow's assignment, not only today's completed shift.

Operating cycle (illustrative times)

1DepartureE.g. 06:30 — shift start
2ShiftRoute and work
3ReturnE.g. 13:00 — depot
4ChargingWindow while parked
5Next departureE.g. next day 06:30
Times are teaching examples only—use your real shifts and confirmed recharge times.

Définir une priorité de recharge

Quand plusieurs engins rentrent ensemble, tout brancher à la fois peut être inutile et, dans certains dépôts, dépasser la puissance disponible. Définissez une séquence selon les besoins réels.

En général, priorité plus élevée :

  1. vehicles that must leave earliest;
  2. units that finished a demanding shift and need more energy back;
  3. vehicles on services that cannot easily be moved;
  4. units with an unusual day or higher-than-usual consumption.

Priority must still match charge required for the next shift and manufacturer guidance. Do not apply the same charge percentage to everyone by default, nor a universal full-charge rule—the right procedure depends on battery, charger, and producer instructions.

Example: connection order (illustrative departure times)

  1. 1Unit A — Departs 07:00 — connect first if more energy is needed
  2. 2Unit B — Departs 09:00
  3. 3Unit C — Departs 11:00
Conceptual schema—not telemetry, fleet apps, or unconfirmed eCargo features.

Organiser les fenêtres de recharge

Charging usually happens during depot dwell time between return and next departure. If a vehicle runs more than one shift per day, an intermediate window may be possible only if battery and charging system support it and time is sufficient.

Un tableau d'affectation simple aide :

Example shift categories (replace indicative times)
Vehicle groupExpected returnNext departureOperating rule
Morning shiftEarly afternoonNext morningCharge during depot dwell
Extended shiftLate afternoonNext morningPriority by energy to replace and departure time
Double shiftBreak between shifts or evening returnSecond shift or next dayMid-shift charge only if allowed by manufacturer

Times are indicative—replace with your own shifts and confirmed recharge times for your vehicles.

The useful window is not always the full time the unit is parked. Consider when it is actually connected, when the bay must be free, and bay access. Outlet availability and charger compatibility also affect organisation.

Aligner la recharge sur la puissance disponible

Shift schedules must fit the depot electrical system. If every unit connects at once, total demand adds to other building loads.

Vehicle count alone does not define required power—you need charger grid draw, connection hours, energy to replace, and other depot load profiles.

If power is limited, consider staggered charging or load management when compatible with installed hardware. Confirm with your electrician and equipment suppliers.

For depot electrical sizing, see the guide on power needed to recharge an electric tricycle fleet.

For energy cost on grid kWh drawn, see also electric tricycle recharge cost.

Organisation des postes de recharge pour une flotte

Une procédure simple pour chaque journée

Effective organisation does not always require complex software. At the start, a shared procedure between fleet lead and operators is enough.

Avant le départ, confirm the assigned unit is available, has the charge level required for the service, and has no issues flagged on the previous return.

Pendant la tournée, log distance, activity, and anything that may affect consumption—unusual load, gradients, or route changes.

Au retour, note kilometres, displayed charge level, and any problems. Connect to a compatible charger following the manufacturer procedure.

Avant la tournée suivante, the fleet lead checks units with the earliest departure are ready and that charge positions have no faults.

These records show whether shifts are sustainable, whether charging windows are enough, and which units need a different assignment.

Quand revoir l'organisation

Update the plan when routes change, daily kilometres increase, new shifts appear, or vehicles are added. Seasonality can change work too—green maintenance, for example, may bring busier periods and less regular returns.

If a unit often returns with little charge or is not ready on time, do not only extend charging time. Check route, load, battery condition, charger, and fit between shift and available range.

On multi-vehicle fleets, mileage monitoring can compare planned vs actual use. GPS data, when provided and configured, can support route reconstruction but does not replace battery status or manufacturer charging procedures.

If the shift does not fit available range, see range and energy needs.

To replace several vehicles and monitor them in service, see électrification de flotte and GPS et gestion de flotte.

Planifier avant d'élargir la flotte

Before buying more electric tricycles, confirm the operating plan is sustainable: which units must leave at the same time, dwell time in depot, energy to recover, and how many bays are really available.

Bunder can help assess eCargo configuration against planned work, shifts, routes, and charging needs. For an initial review, share fleet size, average daily kilometres, return and departure times, and available electrical setup.

General electric fleet planning methods: U.S. DOE — Electric Vehicles for Fleets (not eCargo-specific).

eCargo pages: eCargo Pickup, eCargo Open, eCargo Box.

FAQ tournées et recharge

Can several electric tricycles charge at the same time?

Yes, if the installation, positions, and chargers support simultaneous operation. Before connecting multiple units, check available power and other depot loads.

Is overnight charging a good idea?

Overnight dwell can offer a wide window for units returning at shift end. Verify against your hours, battery, charger, and available power.

How to manage a fleet with two shifts per day?

Identify which vehicles must be ready for the second shift, pause length, and energy to recover. Mid-shift charging is only possible if allowed and compatible with manufacturer guidance.

Must the battery always be charged to 100%?

There is no universal rule. Follow battery and vehicle producer instructions, respecting limits and procedures.

How many charge points does a fleet need?

It depends on how many units must charge in the same interval, dwell duration, energy to replace, and ability to stagger sessions. Define the number after analysing shifts and the installation—not only by counting vehicles.

Vous gérez une flotte de tricycles électriques ?

Share fleet size, shift times, and expected distances. We can help identify the eCargo configuration to explore and technical points to verify for charging organisation.

Contactez-nousDécouvrir les modèles

Vous envisagez un tricycle électrique pour votre activité ?

Découvrez les configurations disponibles adaptées à vos opérations.