Comprar vehículos eléctricos para una empresa no es solo elegir el modelo y un punto de carga. Con más de un vehículo hay que coordinar horarios, rutas, regresos al depósito y el tiempo para recargar las baterías.

La pregunta no es solo cuántas horas tarda una recarga. Hay que saber cuándo vuelve cada vehículo, cuándo debe salir de nuevo y cuánta energía recuperar entre medias. De ello dependen disponibilidad y regularidad del servicio.
Empezar por los turnos, no por las tomas
Primero reconstruya una jornada tipo. Para cada triciclo anote:
- departure and return times;
- kilometres and route type;
- work activity and load carried;
- charge level before departure and on return, if available;
- deadline to be ready again;
- pauses where the unit can stay parked.
This separates short shifts from long or demanding routes—not everyone needs the same charging plan.
Collect several representative days, including peak workload. A plan built only on an average day may fail when distances, loads, or simultaneous returns change.
To link distance and shift energy needs, see autonomía del triciclo eléctrico de trabajo.
Agrupar vehículos en grupos operativos
Fleet management works better when units are grouped by use—departure time, shift length, distance, and return window.
Six tricycles might split into three on early services returning mid-afternoon and three on longer shifts—different charging windows and priorities.
Groups need not be rigid: plan charging for tomorrow's assignment, not only today's completed shift.
Operating cycle (illustrative times)
Establecer prioridad de recarga
When several units return together, connecting all at once may be unnecessary and, in some depots, may exceed available power. Define a sequence based on real needs.
Suelen tener prioridad:
- vehicles that must leave earliest;
- units that finished a demanding shift and need more energy back;
- vehicles on services that cannot easily be moved;
- units with an unusual day or higher-than-usual consumption.
Priority must still match charge required for the next shift and manufacturer guidance. Do not apply the same charge percentage to everyone by default, nor a universal full-charge rule—the right procedure depends on battery, charger, and producer instructions.
Example: connection order (illustrative departure times)
- 1Unit A — Departs 07:00 — connect first if more energy is needed
- 2Unit B — Departs 09:00
- 3Unit C — Departs 11:00
Organizar ventanas de recarga
Charging usually happens during depot dwell time between return and next departure. If a vehicle runs more than one shift per day, an intermediate window may be possible only if battery and charging system support it and time is sufficient.
Una tabla de asignación simple ayuda:
| Vehicle group | Expected return | Next departure | Operating rule |
|---|---|---|---|
| Morning shift | Early afternoon | Next morning | Charge during depot dwell |
| Extended shift | Late afternoon | Next morning | Priority by energy to replace and departure time |
| Double shift | Break between shifts or evening return | Second shift or next day | Mid-shift charge only if allowed by manufacturer |
Times are indicative—replace with your own shifts and confirmed recharge times for your vehicles.
The useful window is not always the full time the unit is parked. Consider when it is actually connected, when the bay must be free, and bay access. Outlet availability and charger compatibility also affect organisation.
Coordinar la recarga con la potencia disponible
Shift schedules must fit the depot electrical system. If every unit connects at once, total demand adds to other building loads.
Vehicle count alone does not define required power—you need charger grid draw, connection hours, energy to replace, and other depot load profiles.
If power is limited, consider staggered charging or load management when compatible with installed hardware. Confirm with your electrician and equipment suppliers.
For depot electrical sizing, see the guide on power needed to recharge an electric tricycle fleet.
For energy cost on grid kWh drawn, see also electric tricycle recharge cost.

Un procedimiento sencillo para cada jornada
Effective organisation does not always require complex software. At the start, a shared procedure between fleet lead and operators is enough.
Antes de la salida, confirm the assigned unit is available, has the charge level required for the service, and has no issues flagged on the previous return.
Durante el turno, log distance, activity, and anything that may affect consumption—unusual load, gradients, or route changes.
Al regreso, note kilometres, displayed charge level, and any problems. Connect to a compatible charger following the manufacturer procedure.
Antes del siguiente turno, the fleet lead checks units with the earliest departure are ready and that charge positions have no faults.
These records show whether shifts are sustainable, whether charging windows are enough, and which units need a different assignment.
Cuándo revisar la organización
Update the plan when routes change, daily kilometres increase, new shifts appear, or vehicles are added. Seasonality can change work too—green maintenance, for example, may bring busier periods and less regular returns.
If a unit often returns with little charge or is not ready on time, do not only extend charging time. Check route, load, battery condition, charger, and fit between shift and available range.
On multi-vehicle fleets, mileage monitoring can compare planned vs actual use. GPS data, when provided and configured, can support route reconstruction but does not replace battery status or manufacturer charging procedures.
If the shift does not fit available range, see range and energy needs.
To replace several vehicles and monitor them in service, see electrificación de flota and GPS y gestión de flota.
Planificar antes de ampliar la flota
Before buying more electric tricycles, confirm the operating plan is sustainable: which units must leave at the same time, dwell time in depot, energy to recover, and how many bays are really available.
Bunder can help assess eCargo configuration against planned work, shifts, routes, and charging needs. For an initial review, share fleet size, average daily kilometres, return and departure times, and available electrical setup.
General electric fleet planning methods: U.S. DOE — Electric Vehicles for Fleets (not eCargo-specific).
eCargo pages: eCargo Pickup, eCargo Open, eCargo Box.
Preguntas frecuentes sobre turnos y recarga
¿Gestiona una flotta de triciclos eléctricos?
Share fleet size, shift times, and expected distances. We can help identify the eCargo configuration to explore and technical points to verify for charging organisation.
¿Valora un triciclo eléctrico para su actividad?
Descubra las configuraciones disponibles para sus necesidades operativas.

