Elektrofahrzeuge für einen Betrieb zu beschaffen heißt nicht nur Modell und Ladepunkt wählen. Bei mehreren Fahrzeugen müssen Arbeitszeiten, Strecken, Depotrückkehr und Ladezeit koordiniert werden.

Entscheidend ist nicht nur die Ladedauer. Sie müssen wissen, wann jedes Fahrzeug zurückkommt, wann es erneut losfährt und wie viel Energie dazwischen nachgefüllt werden muss. Verfügbarkeit und Servicehythmus hängen davon ab.
Mit Schichten beginnen, nicht mit Steckdosen
Stellen Sie zuerst einen typischen Betriebstag dar. Pro Dreirad notieren Sie:
- departure and return times;
- kilometres and route type;
- work activity and load carried;
- charge level before departure and on return, if available;
- deadline to be ready again;
- pauses where the unit can stay parked.
This separates short shifts from long or demanding routes—not everyone needs the same charging plan.
Collect several representative days, including peak workload. A plan built only on an average day may fail when distances, loads, or simultaneous returns change.
To link distance and shift energy needs, see Reichweite des Elektro-Arbeitsdreirads.
Fahrzeuge in Einsatzgruppen einteilen
Fleet management works better when units are grouped by use—departure time, shift length, distance, and return window.
Six tricycles might split into three on early services returning mid-afternoon and three on longer shifts—different charging windows and priorities.
Groups need not be rigid: plan charging for tomorrow's assignment, not only today's completed shift.
Operating cycle (illustrative times)
Ladepriorität festlegen
When several units return together, connecting all at once may be unnecessary and, in some depots, may exceed available power. Define a sequence based on real needs.
In der Regel Vorrang:
- vehicles that must leave earliest;
- units that finished a demanding shift and need more energy back;
- vehicles on services that cannot easily be moved;
- units with an unusual day or higher-than-usual consumption.
Priority must still match charge required for the next shift and manufacturer guidance. Do not apply the same charge percentage to everyone by default, nor a universal full-charge rule—the right procedure depends on battery, charger, and producer instructions.
Example: connection order (illustrative departure times)
- 1Unit A — Departs 07:00 — connect first if more energy is needed
- 2Unit B — Departs 09:00
- 3Unit C — Departs 11:00
Ladezeitfenster organisieren
Charging usually happens during depot dwell time between return and next departure. If a vehicle runs more than one shift per day, an intermediate window may be possible only if battery and charging system support it and time is sufficient.
Eine einfache Zuordnungstabelle hilft:
| Vehicle group | Expected return | Next departure | Operating rule |
|---|---|---|---|
| Morning shift | Early afternoon | Next morning | Charge during depot dwell |
| Extended shift | Late afternoon | Next morning | Priority by energy to replace and departure time |
| Double shift | Break between shifts or evening return | Second shift or next day | Mid-shift charge only if allowed by manufacturer |
Times are indicative—replace with your own shifts and confirmed recharge times for your vehicles.
The useful window is not always the full time the unit is parked. Consider when it is actually connected, when the bay must be free, and bay access. Outlet availability and charger compatibility also affect organisation.
Laden an verfügbare Leistung koppeln
Shift schedules must fit the depot electrical system. If every unit connects at once, total demand adds to other building loads.
Vehicle count alone does not define required power—you need charger grid draw, connection hours, energy to replace, and other depot load profiles.
If power is limited, consider staggered charging or load management when compatible with installed hardware. Confirm with your electrician and equipment suppliers.
For depot electrical sizing, see the guide on power needed to recharge an electric tricycle fleet.
For energy cost on grid kWh drawn, see also electric tricycle recharge cost.

Einfaches Tagesverfahren
Effective organisation does not always require complex software. At the start, a shared procedure between fleet lead and operators is enough.
Vor der Abfahrt, confirm the assigned unit is available, has the charge level required for the service, and has no issues flagged on the previous return.
Während der Schicht, log distance, activity, and anything that may affect consumption—unusual load, gradients, or route changes.
Bei Rückkehr, note kilometres, displayed charge level, and any problems. Connect to a compatible charger following the manufacturer procedure.
Vor der nächsten Schicht, the fleet lead checks units with the earliest departure are ready and that charge positions have no faults.
These records show whether shifts are sustainable, whether charging windows are enough, and which units need a different assignment.
Wann die Planung überarbeiten
Update the plan when routes change, daily kilometres increase, new shifts appear, or vehicles are added. Seasonality can change work too—green maintenance, for example, may bring busier periods and less regular returns.
If a unit often returns with little charge or is not ready on time, do not only extend charging time. Check route, load, battery condition, charger, and fit between shift and available range.
On multi-vehicle fleets, mileage monitoring can compare planned vs actual use. GPS data, when provided and configured, can support route reconstruction but does not replace battery status or manufacturer charging procedures.
If the shift does not fit available range, see range and energy needs.
To replace several vehicles and monitor them in service, see Flottenumstellung auf Elektro and GPS und Flottensteuerung.
Vor Flottenerweiterung planen
Before buying more electric tricycles, confirm the operating plan is sustainable: which units must leave at the same time, dwell time in depot, energy to recover, and how many bays are really available.
Bunder can help assess eCargo configuration against planned work, shifts, routes, and charging needs. For an initial review, share fleet size, average daily kilometres, return and departure times, and available electrical setup.
General electric fleet planning methods: U.S. DOE — Electric Vehicles for Fleets (not eCargo-specific).
eCargo pages: eCargo Pickup, eCargo Open, eCargo Box.
FAQ Schichten und Laden
Elektro-Dreirad-Flotte im Einsatz?
Share fleet size, shift times, and expected distances. We can help identify the eCargo configuration to explore and technical points to verify for charging organisation.
Planen Sie ein Elektro-Dreirad für Ihre Tätigkeit?
Entdecken Sie passende eCargo-Konfigurationen für Ihren Einsatz.

